How To Protect Yourself From Dirty Electricity? I have spent many hours of research to give you the best answer in this article.
Looking for the quick answer:
- Invest in a good EMF meter to find a reading.
- Change your bed position.
- Turn off the circuit breaker at night.
- Use a dirty electricity filter.
Technology has developed leaps and bounds over the last few decades. And with that have evolved our needs from it and the way we interact with it.
Things that were practically unimaginable until a few years ago like machine learning and artificial intelligence are very much part of the mainstream scientific discourse today.
But it is not only in software that we’ve excelled. This has been possible primarily because of the path-breaking developments in silicon tech and semiconductor electronics.
This is really a testament to human ingenuity and our quest for scientific excellence.
However, every coin has two sides. This emergent technology, no matter how appealing, has its share of shortcomings.
In this website, I’ve written countless articles on the dangers of wireless technology and the impact it can have on our health.
Radiation truly is a danger to us all and I encourage you to read more into it at your leisure.
In any case, today we are going to talk about dirty electricity, a menace found at all of our homes that possess a significant health risk if not checked early.
In this article, we will focus on discovering what dirty electricity is, what creates them and how we can protect ourselves from this danger.
The basics of dirty electricity.
We are all accustomed to having power in our homes but have you ever thought back to a time when this wasn’t the case?
America was electrified in the early 1900s and much of the industrial development that is accredited to America comes on the backbone of this robust foundation of electrical power.
We are so accustomed to it that we often forget how old our power infrastructure really and how this ancient structure is holding up in today’s world.
Back in the day, power was transmitted through the wires on a frequency range of 60 Hz as alternating current (AC).
This was chosen to be so because most electrical devices of the day used a consistent linear flow of power in the same amperage and voltage.
However, with a change in times, our electronics have also evolved. Long gone are the days where electronics needed to have consistent current flow.
Now, countless devices use non-linear current input to better their performance which really puts a strain into our old traditional wiring system we got installed at home.
Some electrical devices are more pronounced than others in terms of using transient current but the general consensus is that these devices use one of the following ways to circumnavigate our current system of power delivery:
- They convert the AC current into a low voltage DC current to be used by the components in the circuit board. Typically this is done by stepping down the voltage with the help of a transformer and then using a rectifier to convert AC to DC.
- They step up the voltage to an even higher voltage that is then used by a component in the board, powering the whole circuit.
- They draw current intermittently by switching on and off thus creating a pulse which is a digital signal. This can happen several thousand times in a second.
This impedes the smooth and consistent flow of electricity that the system is programmed to carry on with.
What ends up happening is, all the interruptions create electrical lumps within the wire that are commonly known as dirty electricity or electrical noise.
These electrical lumps continue to live on the wires and with time start generating EMF radiations of their own that are equally dangerous as any other electrical equipment that you might plug into the wall socket.
But is dirty electricity bad for us?
We have experiments that show dirty electricity lumps to be radiating EMF radiation.
And from what we’ve learned so far, continual exposure to radiation is potentially damaging to our health and wellbeing.
It poses a serious threat that not many are aware of and it is a good idea to deal with dirty electricity at the earliest so that we may avoid any untoward incident.
EMF radiation has been shown to cause all sorts of health issues including genetic mutation and potential splitting of the DNA and it’s simply not worth taking the risk when there is so much on the line.
Studies have indicated that continuous exposure to EMF radiation can, in the short term, cause health conditions like fatigue, headaches, and digestive issues while in the long term, it can lead to several chronic conditions including the likes of cancer, Alzheimer’s, and diabetes.
What appliances cause dirty electricity the most?
There are several products, many of which are commonplace in our homes that cause dirty electricity buildup.
Here we list out the top three most common of them:
Dimmer switches are widely popular, thanks to their ability to control the brightness level of the light.
They are very common in households that prefer to have variable brightness options available to them for the same light.
But have you ever considered how these switches achieve different luminescent levels on what is essentially the same hardware?
They do this on a 60 Hz linear flow power line by turning the light on and off several thousand times within the second.
When you need the brightness to be super high, the circuit turns off and back on very quickly, and when you need low lights, it does so slowly.
This regular switching on and off of the circuit creates a spike that adds up quickly to form a lump of dirty electricity that then just sit there on the wire, accumulating more smaller lumps and radiating out electromagnetic waves.
The heart of the computer is really in its motherboard. The motherboard is fabricated with several thousand components, many of which are very sensitive to electrical signals.
Also, there are significant parts of the computer that are powered by silicon-based electrical chips that have a different output response.
Taking all that into account, a computer motherboard is generally powered by 12V DC. However, the power we get from the wall socket is the standard three-phase 60 Hz AC power.
To convert it to our required power specifications, a two-step process is employed. First, the voltage is brought down from 110V to 12V AC by a step-down transformer.
Then, a rectifier bridge is used to essentially chop off the negative sine wave of the AC waveform, thus leaving us with 12V DC.
This whole process creates a lot of electrical noise that is then built upon your wiring and slowly builds up to be big enough to start to radiate.
CFL bulbs have become very common in today’s world, thanks to its low energy consumption, low maintenance and effective and smooth operation.
However, they are a major source of electrical noise. CFL bulbs achieve those stellar stats by using high-frequency AC to power itself.
To achieve this, it uses an electrical ballast to first convert 60 Hz AC to DC current and then to again convert that to high-frequency AC that it then uses.
This takes a toll on the power line, creating little lumps that then add up and get pronounced.
How can I protect against dirty electricity?
There are some things you can do to protect yourself from dirty electricity but of course the best solution is to eliminate the devices that produce it.
If that’s not at all possible for you, here are my top tips that you can adopt to keep yourself and your family safe from the menace of dirty electricity:
Invest in a good EMF meter.
This is crucial if you are concerned about EMF radiation in general.
A good EMF meter is an absolute must for anyone who is aware of the potential risks of EMF radiation and is looking to do something about it.
It not only gives you the ability to measure your immediate environment for electromagnetic anomalies but itis also a helpful indicator of whether the measures you adopt to counter EMF radiation are actually working.
It is a good idea to first take a reading of your house before you do anything to it and then take readings again after you are done with the changes to then compare and see if the results are in line with your expectations.
Find my recommendations for the best EMF meters for home use here.
Change your bed position.
Make sure that your bed is not near any power lines or electrical outlets.
We often place our beds right next to wall sockets for easy access (in case we wanted to charge our phones and still use it) but it’s a horrible idea to do so.
Dirty electricity primarily resides near the wall socket and you sleeping right next to it and getting exposed for eight hours every night can turn out to be a risk to your health that can have grave consequences.
If you want to learn more about how to protect your bedroom from EMF radiation you can find it here.
Turn off the circuit breaker at night.
Once you’re done with your day and are ready to sleep, turn off your circuit breaker.
If you close your bedroom door, it gets insulated enough to not alter the temperature too much from what you had with your air conditioner/heater turned on.
A nice break of eight hours allows the power lines to dissipate the dirty electricity sufficiently so that it poses very little threat. You can also try this when you’re going out.
Simply turn off your circuit breaker and then go out, knowing you’d come back home to an environment sans radiation from dirty electricity.
Use a dirty electricity filter.
Dirty electricity filters are special in that they filter out electrical noise from your power lines.
They do so by the principles of resonance, effectively canceling out their radiation by harmonizing with radiation of its but of opposite polarity.
They can be very effective in controlling your dirty electricity levels at home and are a perfect solution for those who want a quick fix for this mess. Find this one above on Amazon here.
For more on home protection please visit the links bellow
- Reducing EMF Radiation In Your Kitchen
- Protecting Your Home From EMF Radiation
- How To Protect Your Bedroom From EMF Radiation
- Best EMF Meters For Home Use
Is dirty electricity proven to cause health problems?
There haven’t been enough studies to conclusively predict their effects on the human body but from a theoretical standpoint, it does.
We have data to prove that dirty electricity produces radiation and radiation has been shown to cause a whole host of health issues in humans with continuous exposure.
Although more studies are required to be carried out, radiation can, on paper, even cause mutation of our cells and split DNA, thus exponentially increasing our chances of getting cancer and other severe chronic illnesses like diabetes and Alzheimer’s.
Under these circumstances, it is better to be safe than sorry and take necessary precautions to safeguard ourselves as well as our loved ones from dirty electricity radiation.
We don’t know the true extent of damages it can cause but it certainly isn’t reason enough to wait around and find out the hard way.